Wheel Load Scales
Privat Sector
Installation
Catalogue
Reports
Downloads
Training
Analog, Low Profile Wheel Load Scale
Class 4 / NIST approved
Range: 0....10 t (0....20,000 lbs)
Active weighing area: 37.5 x 65.5 cm (25.7 x 14.7")
Platform Heights: 16 mm (0.67")
Weight: 17 kg (37 lbs.)
Digital, Low Profile Wheel Load Scale
Class 4 / NIST approved
Range: 0....10 t (0....20,000 lbs)
Active weighing area: 37.5 x 65.5 cm (25.7 x 14.7")
Platform Height: 17 mm (0.67")
Weight: 17 kg (37.7 lbs)
Operating time: 60 hrs. on 6 D-cell NiCad batteries
Computer interfacing capability
Digital, Low Profile Wheel Load Scale
All eight wheels are placed on two scales no higher then 17mm (0.67"). A nightmare to weigh this trailer ! - No more, two WL-103XLs will measure axle by axle and provide you with a detailed print-out.
Class 4 / NIST apporved
Range: 0....10 t (0....20,000 lbs)
Active weighing area: 139.4 x 38.3cm (55.0 x 14.7")
Platform Height: 17 mm (0.67")
Weight: 29 kg (65 lbs)
Operating time: 60 hrs. on 6 D-cell NiCad batteries
Computer interfacing capability
A complete mobile weighing system
An ideal portable weighing system to set-up within minutes anywhere. A user friendly application software can be installed on any laptop computer and linked through a special cable with two low profile wheel load scales WL-103. The user friendly Windows compatible software monitors the incoming weights, tabulates the same and prints a detailed report. Levelling mats are recommended to equalize all axles to the platform heights, avoiding any kind of measuring errors. A optional portable printer can be supplied to print a detailed weight on location.
LSWIM, yes it's here and it works!
Simply the best there is !
Yes, you've tried them all .... seen it all and now there is life thereafter. HAENNI has done it again! Low speed weigh in motion with an accuracy of better than 5%.
Selfcontained Processing unit with Printer
Portable Data Processing unit providing immediate print-out of wheel-, axle- and vehicle weight. Operates on 12VDC or 115VAC (Battery operated model available)
Design and Function:
The processing unit EC-100 is continuously receiving the weights of the
connected scales and is charging their internal batteries at the same
time.
You asked for it .... here it is!
Special inground racks to level the scales with the road's surface have been designed for semi permanent installations. Slide the WL-103 scales into the rack and your operational in five minutes flat!
Short & Long Leveling Mat
Mats to equalize axles not measured at any given time.
Two length available: 0.4m and 2.8m